Reno A & E B Series Single Channel Inductive Loop Vehicle Detector, Special non-volatile memory saves diagnostic information if power is lost.
Reno A & E Inductive Loop Vehicle Detectors, Inductive Loop Detector, Reno A & E, Loop Detectors, Inductive Loops, Automatic Gate and Door Accessories, Vehicle Detection Loop Systems
Single Channel Inductive Loop Vehicle Detectors
Model B Series


 

 

 

 

 

 

 

 Features & Benefits

Advanced Diagnostics: Low Voltage, Open Loop, and Shorted Loop Conditions.
 Non-Volatile Memory insures loop diagnostics are not lost when power is removed.
Automatic Reset Internal Fuse (24 VAC versions only), provides fuse & circuit protection.
Detect Memory helps prevent detection drops during short power interruptions.
Sensitivity Boost, for gate operation where high profile vehicles might be encountered.
2-Second CALL Delay.
 Dual Programmable relays offer selectable modes of operation:

 

 Output A: True Presence™ (Infinite) or Limited Presence.
Output B: Presence or Pulse on Entry or Pulse on Exit.
FAIL-SAFE and FAIL-SECURE versions available.
4 loop frequencies selectable from the front panel.
8 levels of sensitivity.
Super bright LEDs' provide separate power, DETECT, & loop FAIL indications.
11 pin rear "Amphenol" and 10 pin rear "MS" connector versions available.
Configurations available: 24 VAC, 120 VAC, 240 VAC, 12 VDC, & 24 VDC.

 

Single Channel Inductive Loop Vehicle Detectors     eno A & E B Series Single Channel Loop Vehicle Detector, Page 2

 

Inductive Loop Detectors / Preformed Inductive Loops

Reno A & E Inductive Loop Vehicle Detectors

Reno A & E B Series Single Channel Loop Vehicle Detector, Page 2

PDF Cut Sheets

• Home • Ordering • Company Information • Index Page 1 • Index Page 2 • Index-Page 3 • Reference • Request Product Information •

Engineering Excellence!