Probe Detection Systems

Sure Actioon Incorporated Logo / Magnetic Detection Vehicle Probes

Standard Probe
The standard probe has been in production since 1989.  This probe is designed to detect a vehicle moving as slow as 1/2 mph.  It can be spliced as many times as needed without effecting a signal from the probe.  The Probe may be installed up to 1 mile away from the processor.

Magnetic Vehicle Probe Detector / Model # P5050

 

 

 

 

 

 

 

 

Standard P5050C Probe System
Includes: 111 Processor, P5050 Probe, 12VDC Power Supply, 16.5VAC Plug-In Transformer, 12VB1, Ground (GRND - Lightning Surge Suppressor), N3BOX, CHIMEPLT

 

Standard Probe - P5050

 

Technical Information:  Standard Probe Cut Sheet -- Standard Probe Installation Manual

Magnetic Vehicle Directional Probe Detector / Model #P8000

 

Directional Probe
The Directional Probe is unique in the fact it detects the direction a vehicle is traveling.  This ability allows the processor to initiate different commands based on this directional information.  Lights and a tone generator or chime may be triggered when a vehicle enters the drive. Upon departure, the system may open a free exit gate or control other functions of choice. Multiple systems may be used in the same site to perform other functions as required.  This system has the ability to detect vehicles moving as slow as one m.p.h.

 

 

 

P8000 Probe System
Includes: one 212 Processor, P8000 Probe, 12VDC Power Supply, 16.5VAC Plug-In Transformer, 12VB1, N3BOX, CHIMEPLT
 Technical Information: Directional Probe Cut Sheet -- Directional Probe Installation Manual

Directional Probe - P8000

 

 

Battery Operated Magnetic Vehicle Probe Detector / Model # WP4-P500

 

Battery Powered Probe Systems

 

Sure Action's Battery-Operated Probe is ideal for areas where trenching is particularly difficult.  As with Sure Action's probes, this system will detect vehicles moving as slow as 1/2 mph. 
Includes one WP4 Processor, Inovonics 210M, Inovonics 401R, N3BOX, (2) 9VBL, P500 with 25' 22/2 shielded burial cable, 12VDC5, CHIMEPLT (tested to 2,000 ft.)
Technical Information: Battery-Operated Probe Cut Sheet  -- Battery-Operated Installation Manual

 

 

 

Battery Operated Probe

Magnetic Vehicle Probe Detector / Model # P500 Basic

 

This hardwired probe provides the most cost effective way for installing a probe system.  Detects vehicles moving as slow as 1/2 mph.  Probe comes assembled with a specific length of wire. The Installer may cut the wire shorter; however, splicing on additional wire to this unit is not recommended. The leads are available in 50', 125', 250', 500' and 1000' lengths.  All leads are 22/2 shielded direct burial cable.

 

 

Includes one P500 Processor or P500B (P500 Processor, N3Box, 12VDC5) P500 Probe (P500-50, P500-125, P500-250, P500-500 or P500-1000) Chime, other sounder or lighting controls
Basic Probe System
Technical Information Basic Probe Cut Sheet -- Basic Probe Installation Manual
 P500 Probe

 

 

Basic Probe (Economy Model)

 

Click on this logo to down load Adobe Acrobat Reader @ Adobe.com

 

Back to Index Page #1

Back to Index Page #1

 

Sure Action Page #2

Sure Action Page #2

 

• Home • Ordering • Company Information • Index Page 1 • Index Page 2 • Index-Page 3 • Reference • Request Product Information •