The LIS temporary tape loops are designed for easy installation where the requirement for a short-term inductive loop exists. As temporary replacements for the defective permanent loop on an intersection controller, for signal control at construction sites, or for occasional speed and count monitoring stations, our loop offers a cost and time effective alternative.  Self adhesive rubberized asphalt backing combined with a hard-wearing surface ensures durability and secure bonding to the pavement with minimal surface preparation.  One person can easily install this temporary loop in minutes. Thus, minimizing disruption of normal traffic flow.

Wire Sizes

Type UL3173 / XHHW-2, 600V 125c (22,18 or 14 Gauge) Stranded or approved equal      

  Note: Wire gauge specified by the customer

Loop Sizes:

2' X 6' to 6' x 30'  Protected leads to 80'
   

Lead-In:   

26’ total with 6’ protected for installation on the pavement. All Non-Spliced**
   
Thickness:   0.187’’ on center line tapering to 0.0625’’ at the edges (18Ga.)

A cross section of the Temporary Tape loop displays five components.  On the bottom is a 4² wide paper protective release sheet to ease storage, packing and installation. This will be discarded directly prior to the installation.  Immediately on top of this, and in contact with the pavement when the loop is installed, is a 4-inch wide strip of adhesive bituminous rubber compound coupled with a high-density polyethylene film.  This padding strip is the foundation for the XLP insulated 4 or 5 turn 22,18 or 14-gauge loop.  On top of this foundation and loop wires assembly is placed a 2” padding strip.  The top component is a 4² wide sheet of the same adhesive compound with an overlay of woven poly mesh for reinforcement.     

• Home • Ordering • Company Information • Index Page 1 • Index Page 2 • Index-Page 3 • Reference • Request Product Information •

Text Box: EXPLODED CROSS SECTION Text Box: PROTECTIVE RELEASE SHEET Text Box: WIRE TURNS (AS REQUIRED) Text Box: POLYETHYLENE FILM Text Box: ADHESIVE RUBBER COMPOUND Text Box: WOVEN POLYPROPYLENE MESH

LIS, Inc. provides Loop Detectors, Preformed Loops, Preformed loop, Surface Mount Loops, Saw Cut Loops, Pave Over Loops, High Temperature Loops, Inductive Loops, Loop Sealant, Loop Sealer, Automatic Gate and Door Accessories, Loop Installation Equipment, Loop Test Equipment, Megger, Loop Tester, Vehicle Detection Loop Systems

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

 

 

 

Tape Temporary Inductive Loop Installation

Tape Style Temporary
      Inductive Loop

 

Easy to Install - Preformed - Field Proven

 

Tape Style Temporary Inductive Loop, Page 2Tape Style Temporary Inductive Loop, Page 2

 

 

 

 

PDF Version